BODY SPAS
Custom Showers - Part 4
The Kohler BodySpa System uses a concept similar to whirlpool bathing. It arranges a series of whirlpool jets vertically in a shower-like enclosure, except that the drain is closed while the pump is running and the water is recirculated, creating a stand-up massage effect.
Custom 6,8, or 10-jet systems may be built from components into an alcove or corner. The modular 6-jet system is sold as a single unit. It can be retrofitted in a 5’ or 6’ alcove, which is ideal for upgrading an existing bath or whirlpool.
A handy electronic touch pad allows the user to adjust the water flow for the desired massaging action. An integral heater is standard and helps maintain the original water temperature. The system recirculates water up to twice a minute.
BodySpa jets, made exclusively by Kohler, are strategically placed on either side of the spine at key massage accupressure points.
Instead of a sharp stream from a narrow opening, each BodySpa jet propels a wide cylinder of water that is dispersed across the shoulders and down the center of the back in the style of a Swedish massage.
The K-1000 is a ten-jet system with lighted waterfall electronic jet selection control, and variable water flow control. One tower, footbath, drain, faucet and enclosure is required for each complete installation.
The K-1015 includes an alcove footbath with integral heater and 2 hp pump. It is built of high-gloss Acrylic and backed with a solid layer of fiberglass to ensure durability. One tower, footbath, drain, faucet and enclosure are required for each complete installation
